Mstp Configuration Commands; Configuration Related Commands; Spanning-Tree - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
18

18.1 Configuration Related Commands

18.1.1

spanning-tree

Use this command to enable MSTP and configure its basic settings globally. The no form of
the command disables the spanning-tree function. The no form of the command with
parameters only restores the corresponding parameters to the default values, but does not
disable the spanning-tree function.
spanning-tree [forward-time seconds|hello-time seconds |max-age seconds]
no spanning-tree [forward-time | hello-time | max-age]
Parameter
description
Default
configuration
Command
mode
MSTP
Commands
Parameter Description
forward-time Interval at which the port status changes
seconds
hello-time Interval at which the switch sends the BPDU
seconds message
max-age
Maximum aging time of the BPDU message
seconds
Disabled.
Global configuration mode.
Chapter 18 MSTP Configuration Commands
Configuration
18-1