Dot1X Guest-Vlan - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
44.5.6

dot1x guest-vlan

Use this command to set whether to allow guest vlan jump. Use the no form of the
command to disable the function.
dot1x guest-vlan vid
no dot1x guest-vlan
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
commands
Parameter
vid
Disabled.
Interface configuration mode.
1. Before using guest vlan, you need to execute dot1x
dynamic-vlan enable command first，or the configured guest vlan
does not take effect.
2. When configuring guest vlan, it is recommended not to modify
L2 attribute of the port, especially not to add the port to a VLAN
manually.
3. Execute show running-config to view 802.1x configuration.
The following example sets 802.1x guest vlan jumping:
DES-7210# configure terminal
DES-7210(config)# interface gigabitEthernet 4/5
DES-7210(config-if)# dot1x guest-vlan 10
DES-7210(config)# end
DES-7210#
Command Description
show
Show the configuration information about 802.1x.
running-config
Chapter 44 802.1X Configuration Commands
Description
In the range from 1 to 4094.
44-19