Switchport Mode Uplink; Frame-Tag Tpid Tpid - D-Link DES-7200 Cli Reference Manual

Chapter 13 802.1Q Tunneling Configuration Commands
Related
commands
Platform
description
13.1.2

switchport mode uplink

Use this command to configure the interface as a uplink port.
switchport mode uplink
no switchport mode
Parameter
description
Default
configuration
Command
mode
Examples
Related
commands
Platform
description
13.1.3

frame-tag tpid tpid

Use this command to set the manufacturer tpid.
frame-tag tpid <tpid>
13-2
DES-7210(config)# end
Command
show vlan private-vlan
The software version must be R10.1 and later.
Parameter
no
No uplink port is configured.
Interface configuration mode.
Here is an example of configuring the interface as a uplink port.
DES-7210(config)# interface gigabitEthernet 0/1
DES-7210(config-if)# switchport mode up-link
DES-7210(config)# end
Command
show vlan private-vlan
The software version must be R10.1 and later.
DES-7200 CLI Reference Guide
Description
Description
Remove the settings.
Description