Bgp/Mpls L3 Vpn Commands; Address-Family Ipv4 Vrf - D-Link DES-7200 Cli Reference Manual

Chapter 42 MPLS Configuration Commands
Related
commands

42.2 BGP/MPLS L3 VPN Commands

42.2.1 s
addre s-family ipv4 vrf
Use this command to enter to or exit from the VRF address family mode, and set the
interaction of a vrf route.
[no] address-family ipv4 vrf
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
42-42
Command
show mpls ldp
parameters
vrf-name
Parameter
vrf-name
By default, no VRF address family is defined.
Router mode.
This command allows you to enable (or disable) the route information
exchange between
exit-address-family to return to the BGP configuration mode.
DES-7210(config)# router bgp 100
DES-7210(config-router)# address-family ipv4 vrf vrf1
Command
DES-7200 CLI Reference Guide
Description
Show the LDP global configuration parameters
Description
VRF name.
the PE and
Description
CE. Use command