DES-7200 CLI Reference Guide
Platform
description
33.1.21 bgp log-neighbor-changes
Use this command to log the BGP status changes without turning on debug. You can use
the no form of the command to disable this function.
bgp log-neighbor-changes
no bgp log-neighbor-changes
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description
33.1.22 bgp router-id
Use this command to configure the ID-IP address of the device. The no form of the
command restores it to the default IP address.
bgp router-id ip-address
no bgp router-id ip-address
N/A.
Disabled.
BGP configuration mode.
The debug command can also be used to log the BGP status
changes. But this command may consume a great deal of resources.
DES-7210(config-router)# bgp log-neighbor-changes
Command
Description
router bgp
Enabled the BGP protocol.
Chapter 33 BGP4 Configuration Commands
33-19