Chapter 18 MSTP Configuration Commands
18.1.27 clear spanning-tree detected-protocols
Use this command to force the interface to send the RSTP BPDU message and check the
BPDU messages.
clear spanning-tree detected-protocols [interface interface-id]
Parameter
description
Default
configuration
Command
mode
Examples
Related
commands
18.1.28 spanning-tree compatible enable
Use this command to send the message selectively carried with MSTI according to the
interface attibute of current port to realize interconnection with other vendors.
spanning-tree compatible enable
no spanning-tree compatible enable
Parameter
description
Default
configuration
Command
mode
Examples
18-20
Parameter
interface-id
N/A.
Privileged configuration mode.
DES-7210# clear spanning-tree detected-protocols
Command
show spanning-tree
interface
N/A.
Disabled.
Interface configuration mode.
DES-7210(config)# spanning-tree compatible enable
DES-7200 CLI Reference Guide
Description
ID of the interface
Description
Show the STP configuration of
the interface.