Show Ip Ospf Neighbor - D-Link DES-7200 Cli Reference Manual

Chapter 32 OSPFv2 Configuration Commands
32.2.5

show ip ospf neighbor

Use this command to show the OSPF neighbor list in the privileged user mode.
show ip ospf [process-id] neighbor [[detail] | [[interface-type
interface-number] [neighbor-id]]]
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
32-68
DD received send
LS-Req received send
LS-Upd received send
LS-Ack received send
Discard
Parameter Description
(Optional) Show the neighbor details.
Detail
interface-type (Optional) Show the neighbor information of the
interface-number specified interface
(Optional) Show the information of the specified
neighbor-id
neighbor
N/A.
Privileged mode.
This command shows neighbor information usually used to check
whether the OSPF is running normally.
The output results of the show ip ospf neighbor command are as
follows:
DES-7210# show ip ospf neighbor
OSPF process 1,1 Neighbors, 1 is Full:
Neighbor ID Pri
Interface
3.3.3.3 1 Full/BDR
FastEthernet 1/0
DES-7200 CLI Reference Guide
Statistics on the DD packets sent and
received
Statistics on the LS request packets sent
and received
Statistics on the LS update packets sent
and received
Statistics on the LS response packets
sent and received
Statistics on the discarded OSPF packets
State Dead Time
00:00:32
Address
192.88.88.72