Clear Mac-Address-Table Static; Mac-Address-Table Static - D-Link DES-7200 Cli Reference Manual

Chapter 14 MAC Address Configuration Commands
14.1.4

clear mac-address-table static

Use this command to clear the static MAC address.
clear mac-address-table dynamic [address mac-addr] [interface interface-id] [vlan
vlan-id]
Parameter
description
Command
mode
Usage
guidelines
Examples
Related
commands
14.1.5

mac-address-table static

Use this command to configure a static MAC address. Use the no form of the command to
remove a static MAC address.
mac-address-table static mac-addr vlan vlan-id interface interface-id
no mac-address-table static mac-addr vlan vlan-id interface interface-id
Parameter
description
14-4
Parameter
static
address mac-addr
interface interface-id
vlan vlan-id
Privileged mode.
Use show mac-address-table
addresses.
The example below is to clear the static MAC address
00d0.f800.073c:
DES-7210# clear mac-address-table static address 00d0.f800.073c
Command
mac-address-table static
show mac-address-table
static
Parameter
mac-addr
DES-7200 CLI Reference Guide
Description
Clear all the static MAC addresses.
Clear the specified
address.
Clear all the static MAC addresses of
the specified interface.
Clear all the static MAC addresses of
the specified VLAN.
static
to display all the static MAC
Description
Configure the static MAC address.
Show the static MAC address.
Description
Destination MAC address of the
static MAC