DES-7200 CLI Reference Guide
4
4.1
Configuration Related Commands
The following describes how to upgrade and maintain by using the COPY command in the
CLI environment of the main program.
Upgrade and maintain by Xmodem protocol: copy xmodem command.
Upgrade and maintain by Tftp protocol: copy tftp command.
4.1.1
copy xmodem
Upgrade and maintain by using the xmodem protocol or upload and download by using the
xmodem protocol.
copy flash: filename xmodem
copy xmodem flash: filename
Parameter
description
Default
Command
mode
Usage
guidelines
Chapter 4 Upgrade and Maintenance Configuration Commands
Upgrade and Maintenance
Configuration Commands
Parameter
Description
filename
The name of files in the equipment.
N/A.
Privileged mode.
If the file is transmitted successfully, show the length of the
transmitted file; otherwise, show the failure information. Any files can
be transmitted by TFTP, such as main program file and parameter
file. The Xmodem can only be transmitted in the out-band (serial
ports).
The following shows two examples: The first one transmits the files to
the switch from the host via the xmodem protocol. The second
uploads the configuration file in the switch to the host via the xmodem
protocol.
4-1