Show Spanning-Tree Mst - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Examples
Related
commands
18.2.3

show spanning-tree mst

In privileged EXEC mode, use this command to display the information of MST and
instances.
show spanning-tree mst {configuration |instance-id [ interface interface-id ] }
Parameter
description
Default
configuration
Command
mode
Examples
Related
commands
DES-7210# show spanning-tree interface gigabitethernet 1/5
Command Description
spanning-tree Enable the BPDU filter feature someone the
bpdufilter interface.
spanning-tree
Enable the portfast on the interface.
portfast
spanning-tree
Enable the BPDU guard on the interface.
bpduguard
spanning-tree
Set the link type of the interface to point-to-point.
link-type
Parameter Description
configuration The MST configuration of the equipment.
instance-id Instance number
interface-id Interface number
All the instances are displayed by default.
Privileged mode.
DES-7210# show spanning-tree mst configuration
Command Description
spanning-tree
mst Configure the MST region.
configuration
spanning-tree
Show the path cost of the instance.
mst cost
Chapter 18 MSTP Configuration Commands
18-23