Port-Based Flow Control Configuration Commands; Configuration Related Commands; Storm-Control - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
43

43.1 Configuration Related Commands

Port security module configuration includes the following commands:

strom-control

switchport protected

protected-ports route-deny

switchport port-security

switchport port-security aging

switchport port-security mac-address

arp-check
43.1.1

storm-control

Use this command to enable the storm suppression. Use the no form of the command to
disable the storm suppression.
storm-control {broadcast | multicast | unicast} [{level percent | pps p a c k e t s |rate-bps}]
no storm-control {broadcast|multicast|unicast}[{level percent | pps
p a c k e t s |rate-bps}]
Parameter
description
Chapter 43 Port-based Flow Control Configuration Commands
Port-based Flow Control
Configuration
Commands
Parameter Description
broadcast Enable the broadcast storm suppression function.
Enable the unknown unicast storm suppression
multicast
function.
Enable the unknown unicast storm suppression
unicast
function.
43-1