Ip Ssh Version - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Examples
Related
commands
Version
description
48.1.3

ip ssh version

Use this command to set the version of the SSH server. Use the no form of this command to
restore it to the default setting.
ip ssh version {1 | 2}
no ip ssh version
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
DES-7210# configure terminal
DES-7210(config)# crypto key zeroize rsa
Command
show ip ssh
crypto key generate
{rsa|dsa}
The software version must be R10.1 and later.
Parameter Description
1 Support the SSH1 client connection request.
2 Support the SSH2 client connection request.
SSH1 and SSH2 are compatible by default. When a version is set,
the connection sent by the SSH client of this version is accepted only.
The no ip ssh version command can also be used to restore it to
the default setting.
Global configuration mode.
This command is used to configure the SSH connection protocol
version supported by SSH Server. By default, the SSH Server
supports SSH1 and SSH2. If Version 1 or 2 is set, only the SSH client
of this version can connect to the SSH Server. Use the show ip ssh
command to show the current status of SSH Server.
Chapter 48 SSH Configuration Commands
Description
Show the current status of the SSH Server.
Generate DSA and RSA keys.
48-3