Set Comm-List Delete - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Usage
guideline
Examples
Related
commands

34.1.32 set comm-list delete

Use this command to delete the COMMUNITY_LIST attribute for the routes that match the
rule in the route map configuration mode. Use the no form of this command to remove the
setting. This command is only used to configure policy-based routing.
set comm-list community-list-number | community-list-name delete
no comm-list community-list-number | community-list-name delete
Parameter
description
Default
configuration
Chapter 34 Protocol-independent Configuration Commands
Use this command to configure the AS_PATH attribute for the
matched routes.
route-map set-as-path
match as-path 1
set as-path prepend 100 101 102
Command
match as-path
match community
match metric
match origin
set community
set metric
set metric-type
Parameter
community-list-number
community-list-name
None
Description
Match the AS_PATH.
Match the community.
Match the route metric.
Match the route source.
Set the COMMUNITY
attribute.
Set the metric.
Set the type.
Description
Number of the community list
Name of the community list
34-43