Ipv6 Nd Ra-Mtu - D-Link DES-7200 Cli Reference Manual

Chapter 36 IPv6 Configuration Commands
ipv6 nd ra-hoplimit value
no ipv6 nd ra-hoplimit
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands

36.1.15 ipv6 nd ra-mtu

Use this command to set the MTU of the RA messag. Use the no form of this command to
restore it to the default setting.
ipv6 nd ra-mtu value
no ipv6 nd ra-mtu
Parameter
description
Default
configuration
36-14
Parameter Description
value Hopcount
The default value is 64.
Interface configuration mode.
It is used to set the hopcount of the RA message.
DES-7210(config)# interface vlan 1
DES-7210(config -if)# ipv6 nd ra-hoplimit 110
Command Description
show ipv6
Show the interface information.
interface
ipv6 nd
Set the lifetime of the device.
ra-lifetime
ipv6 nd
Set the interval of sending the RA message.
ra-interval
Set the MTU of the RA message.
ipv6 nd ra-mtu
Parameter Description
value MTU value, 0-4294967295.
IPv6 MTU value of the network interface.
DES-7200 CLI Reference Guide