Broadcast Message Processing Configuration Commands; Ip Broadcast-Addresss - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Examples

21.3 Broadcast Message Processing Configuration Commands

The broadcast message processing configuration related commands include:


ip broadcast-addresss


ip directed-broadcast
21.3.1 ip broadcast-addresss
Use this command to define a broadcast address for an interface in the interface
configuration mode. The no form of this command is used to remove the broadcast address
configuration.
ip broadcast-addresss ip-address
no ip broadcast-addresss ip-address
Parameter
description
Default
Command
mode
trusted MAC and trusted ARP:
1 STP is enabled.
2 The port is set to neither root port nor designed port. This may be
caused when the port is up or down or the port priority is
modified.
3 TC packet is received on the port, and the addresses of the ports
not receiving PC packet are cleared.
The following configuration is to enable the trusted ARP function in
the global configuration mode.
config
service trustedarp
Parameter Description
ip-address Broadcast address of IP network
The default IP broadcast address is 255.255.255.255.
Interface configuration mode.
Chapter 21 IP Address Configuration Commands
21-13