DES-7200 CLI Reference Guide
13
13.1 Configuration Related Commands
switchport mode dot1q-tunnel
switchport mode uplink
frame-tag tpid tpid
inner-priority-trust enable
13.1.1
switchport mode dot1q-tunnel
Use this command to configure the interface as the 802.1Q tunneling interface.
switchport mode dot1q-tunnel
no switchport mode
Parameter
description
Default
configuration
Command
mode
Examples
Chapter 13 802.1Q Tunneling Configuration Commands
802.1Q Tunneling
Configuration
Commands
Parameter
no
No 802.1Q tunneling interface is configured.
Interface configuration mode.
Here is an example of configuring the interface as the 802.1Q
tunneling interface:
DES-7210(config)# interface gi 0/1
DES-7210(config-if)# switchport access vlan 22
DES-7210(config-if)# switchport mode dot1q-tunnel
Description
Delete the corresponding 802.1Q tunneling
interface configuration.
13-1