Lsp-Control-Mode - D-Link DES-7200 Cli Reference Manual

Chapter 42 MPLS Configuration Commands
42.1.8

lsp-control-mode

Use this command to set the LDP control mode globally. Use the no form of this command
to restore the default value.
lsp-control-mode [independent | ordered]
no Isp-control-mode
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
42-8
mpls ldp
max-hop-count
Parameter Description
independent Use the independent control mode
ordered Use the ordered control mode
Independent control mode
config-mpls-router mode
Use this command to reset and rebuild the LDP session.
DES-7210(config)# mpls router ldp
DES-7210(config-mpls-router)# lsp-control-mode ordered
Command
DES-7200 CLI Reference Guide
Configure the maximum hop count allowed for
LDP loop detection
Description