Medium-Type - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Related
commands
6.1.6

medium-type

Use this command to select the medium type for an interface. Use the no form of the
command to restore it to the default setting.
medium-type { fiber | copper }
no medium-type
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
DES-7210(config-if)#
Command
show interfaces
Parameter Description
fiber Optical interface.
Copeer interface.
copper
Copeer interface.
Interface configuration (physical interface, except for AP and SVI)
If a port can be selected as an optical port or electrical port, you can
only select one of them. Once the media type is selected, the
attributes of the port, for example, status, duplex, flow control, and
rate, all mean those of the currently selected media type. After the
port type is changed, the attributes of the new port type take the
default values, which can be modified as needed.
DES-7210(config)# interface gigabitethernet 1/1
DES-7210(config-if)# medium-type copeer
Command
show interfaces
Chapter 6 Interface Configuration Commands
Description
Show the interface information.
Description
Show the interface information.
6-5