Propagate-Release; Show Mpls Forwarding-Table - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Related
commands

42.1.31 propagate-release

Use this command to enable label release. Use the no form of this command to disable this
function with no label release messages transmitted.
[no] propagate-release
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands

42.1.32 show mpls forwarding-table

Use this command to show the MPLS forwarding table.
Command
show mpls ldp
discovery
show mpls ldp
neighbor
Disabled
config-mpls-router mode.
This command execution does not influence the label release
messages previously received from the LDP instance, only the ones
received later.
DES-7210(config)# mpls router ldp
DES-7210(config-mpls-router)# propagate-release
Command
show mpls ldp
parameters
Chapter 42 MPLS Configuration Commands
Description
Show the information of neighbor discovered
by the LDP.
Show the LDP session state.
Description
Show the LDP global configuration attribute
42-31