Ntp Trusted-Key - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Usage
guidelines
Examples
Related
commands
27.1.9

ntp trusted-key

Use this command to set a key at the global trusted key.
ntp trusted-key key-id
no ntp trusted-key key-id
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
commands
8 consecutive packets are synchronized for the first synchronization
of NTP and each server. Then the synchronization occurs every one
minute. This command
synchronization during the interval of auto-sync.
The following example synchronizes the NTP realtime.
ntp synchronize
Command
ntp server
Parameter
key-id
N/A.
Global configuration mode.
The NTP communication parties must use the same trusted key. The
key is identified by ID and is not transmitted to improve security.
The following configures an authentication key and sets it as the
corresponding server trusted key.
ntp authentication-key 6 md5 wooooop
ntp trusted-key 6
ntp server 192.168.210.222 key 6
Command
ntp authenticate
Chapter 27 NTP Configuration Commands
is used to
Description
Specify a NTP server.
Description
Global trusted key ID
Description
Enable the security authentication mechanism.
complete the instant
27-9