Debug Ip Dhcp Client; Debug Ip Dhcp Server - D-Link DES-7200 Cli Reference Manual

Chapter 23 DHCP Configuration Commands
Related
commands
23.2.4

debug ip dhcp client

Use this command to carry out the DHCP client debugging in the privileged user mode:
debug ip dhcp client
no debug ip dhcp client
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
23.2.5

debug ip dhcp server

Use this command to carry out the DHCP Server debugging in the privileged user mode:
debug ip dhcp server
no debug ip dhcp server
Parameter
description
Default
23-24
clear ip dhcp server statistics
Command
show ip dhcp
server statistics
N/A.
Disabled.
Privileged mode.
This command is used to show the main message content of the
DHCP client during the interaction of the servers and the processing
status.
The example below turns on the debugging switch of the DHCP client
in the equipment.
debug ip dhcp client
N/A.
Disabled.
DES-7200 CLI Reference Guide
Description
Show the statistics record of the DHCP server.