Netbios-Name-Server - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Default
Command
mode
Usage
guidelines
Examples
Related
commands

23.1.15 netbios-name-server

Use this command to configure the WINS name server of the Microsoft DHCP client
NETBIOS in the DHCP address pool configuration mode. The no form of this command can
be used to delete the WINS server.
netbios-name-server ip-address [ ip-address2...ip-address8 ]
netbios-name-server
Parameter
description
Default
Command
mode
The lease is 1 days, by default.
DHCP address pool configuration mode.
When the lease is getting near to expire, the DHCP client will send
the request of renewal of lease. In general, the DHCP server will
allow the renewal of lease of the original IP address.
The configuration example below sets the DHCP lease to 1 hour.
lease 0 1
The configuration example below sets the DHCP lease to 1 minute.
lease 0 0 1
Command
ip dhcp pool
Parameter
ip-address
ip-address2...ip-address8
No WINS server is defined, by default.
DHCP address pool configuration mode.
Chapter 23 DHCP Configuration Commands
Description
Define the name of the DHCP address
pool and enter into the DHCP address
pool configuration mode.
Description
IP address of the WINS server. It is
required to configure one IP address at
least.
(Optional) IP addresses of WINS servers.
Up to 8 WINS servers can be configured.
23-15