YOKOGAWA GX10 User Manual page 167

IM 04L51B01-17EN
Operation Event string
Power off* POWER OFF
Power on* POWER ON
Login* LOGIN
Logout* LOGOUT
User lock out UserLocked
Control
Mode change ChgMode
Time change* TIME CHANGE
New time* NEW TIME
Start time TIME ADJ START
adjustment*
Stop time TIME ADJ END
adjustment*
SNTP time change* SNTP ADJUST
DST start* DST START
DST end* DST END
Password change ChgPasswd
User locked ACK UserLockedACK —
Alarm ACK AlarmACK
Message writing Message###### ###
Recording start Record Start###
Recording stop Record Stop###
Manual sample ManualSample
2.10 ASCII Output Format
### information and detailed information
—
—
—
—
User:UUU
UUU User number
ss•••
ss••• Mode [Operate, A/Dcal,
FirmUpdate]
—
—
amm:ss:xxx.yyy
Difference
a Sign (- lag, + lead)
mm Minute
ss Second
xxx Millisecond
yyy Microsecond
Example:
+00:01:000.000
—
—
—
—
User:UUU
UUU User number
Channel:cc•••,Level:ll•••
cc••• Channel (ALL for all ACK)
ll••• Level (ALL for all ACK)
Front half: Message number (output in the
event string)
Normal messages: 001 to 100
Free messages: F01 to F10
Freehand message: Hnd
### Latter half: Batch group number (output in
the event string)
When multi batch is disabled: (space)
Batch group number (when multi batch is
enabled): -01 to -12
Example:
"Message001" "MessageF01-12"
<Detailed information>
Data Time:tt•••
tt••• Data timestamp (only for add
messages. Not output for
other messages.)
The format is the same as
the time section of the FLog
command output.
Example:
Data Time:2012/03/13 10:25:28
### When multi batch is disabled: (space)
When multi batch is enabled:
-01 to -12 Batch group number
### When multi batch is disabled: (space)
When multi batch is enabled:
-01 to -12 Batch group number
—
1
2
App
2-149