YOKOGAWA GX10 User Manual page 85

SMultiKind
Multi Panel [GX/GP]
Set the screens to display on the multi panel.
Syntax
SMultiKind,p1,p2,p3,p4
p1 Registration number (1 to 20)
p2 Screen position (1 to 6)
p3 Screen type
Trend
Digital
Bar
Overview
Alarm
Message
Memory
Report
Modbus-M
Mosbus-C
Watt
Switch
Action-
Log
Error-Log Error log
Commu-Log Communication log
Ftp-Log
Web-Log
Mail-Log
Modbus-
Log
Sntp-Log
Dhcp-Log
Network
SLMP-C
SLMP-Log
Reminder
ControlGroup
ControlSummary
ControlAlarmSummary
ControlOverview
Group number
P4
If p3=Trend, Digital, or Bar
Display group number
If p3=ControlGroup
Control group number
Query
SMultiKind[,p1[,p2]]?
Example Display the bar graph of display group 8 in
screen position 3 of the registration number 1
panel.
SMultiKind,1,3,Bar,8
Description
• This command is only valid for the GX20/GP20.
• Report is an option (/MT).
• Modbus-M and Modbus-C are an option (/MC).
• Watt is an option (/E2).
IM 04L51B01-17EN
Trend
Digital
Bar graph
OVERVIEW
Alarm summary
Message summary
Memory summary
Report summary
Modbus master status
Modbus client status
WT communication status
Internal switch status
Event log
FTP log
Web log
Mail log
Modbus log
SNTP log
DHCP log
Network information
SLMP client status (/E4)
SLMP log (/E4)
Reminder (/AH)
Control group
Control summary
Control alarm
summary
Control overview
• Custom display screen (/CG) cannot be shown in a
multi panel.
• This command can be used only when the multi batch
function (/BT) is disabled.
• ControlGroup, ControlSummary,
ControlAlarmSummary, and ControlOverview are valid
when the PID control module is installed.
SHomeMonitor
Standard Screen Information [GX/GP]
Sets the standard screen display information.
Syntax
SHomeMonitor,p1,p2
p1 Information type (see the table of the
SMonitor
command)
p2 Status (see the table of the
command)
Query
SHomeMonitor[,p1]?
Example Set the trend display to all-channel display.
SHomeMonitor,Trend,All
2.4 Setting Commands
SMonitor
2-67
1
2
App