YOKOGAWA GX10 User Manual page 63

SDigitalSign
Electronic Signature Inclusion (/MT)
Sets whether to include an electronic signature in report
template output PDF files.
Syntax
SDigitalSign,p1,p2
p1 Signature target (PDF)
p2 Electronic signature inclusion (Off, On)
Query
SDigitalSign[p1]?
Example Include an electronic signature in report
template output PDF files.
SDigitalSign,PDF,On
Description
•
You cannot use this command to configure settings
while recording is in progress.
•
You cannot use this command to configure settings
while computation is in progress.
SRepCh
Report Channel (/MT)
Assigns a channel to a report channel.
Not Assign a Channel
Syntax
SRepCh,p1,p2
p1 Report Channel Number
p2 Usage (Off)
Assign a Channel
Syntax
SRepCh,p1,p2,p3,p4
p1 Report Channel Number
p2 Usage
I/O channel
IO
Math Math channel
Com Communication channel
p3 Channel number
P4 Sum scale (Off, /sec, /min, /hour, /day)
Query
SRepCh[,p1]?
Example Assign I/O channel 0002 to report channel 1.
Set the sum scale to Off.
SRepCh,001,IO,0002,Off
Description
•
You cannot use this command to configure settings
while recording is in progress.
•
You cannot use this command to configure settings
while computation is in progress.
•
If p2=Off, you cannot set p3 or subsequent parameters.
•
Communication channels are an option (/MC).
•
If the measurement mode is dual interval, the number
of channels is halved.
•
If the measurement mode is set to high speed or dual
interval, and the scan interval is 50 ms or less, the
number of channels must be within their limits.
IM 04L51B01-17EN
SRepBatchInfo
Batch information output (/MT)
Sets the batch information output.
Syntax
SRepBatchInfo,p1
p1 Batch information output (Off, On)
Off Disabled
On Enabled
Query
SRepBatchInfo?
Example Output batch information.
SRepBatchInfo,On
Description
•
You cannot use this command to configure settings
while recording is in progress.
•
You cannot use this command to configure settings
while computation is in progress.
SLcd
LCD [GX/GP]
Sets the brightness and backlight saver of the LCD.
Syntax
SLcd,p1,p2,p3,p4
p1 Brightness (1 to 6)
p2 Backlight saver mode
Off
Dimmer
TimeOff
p3 Backlight saver saver time (1min, 2min,
5min, 10min, 30min, 1h)
P4 Backlight saver restore
Key+Touch
Key+Touch+Alarm Key, touchscreen, or
Query
SLcd?
Example Set the LCD brightness to 3 and the screen
backlight saver type to DIMMER. Set the
amount time of until the GX/GP switches to
saver mode to 5 minutes and the event that
causes the GX/GP to return from saver mode
to the pressing of a key and tapping of the
touchscreen.
SLcd,3,Dimmer,5min,Key+Touch
Description
•
p3 and subsequent parameters are valid when
p2=Off.
SViewAngle
View Angle [GX/GP]
Set the view angle.
Syntax
SViewAngle,p1
p1 View Angle
Upper Easy to view from above
Lower Easy to view from below
Query
SViewAngle?
Example Set the view angle so that it is easy to view
from above.
SViewAngle,Upper
Description
•
This command is valid for the GX10/GP10.
2.4 Setting Commands
Not used
Dimmer
Off
Key or touchscreen
alarm
2-45
1
2
App