YOKOGAWA GX10 User Manual page 76

2.4 Setting Commands
SModCCmd,2,Read,5,1,INT32_B,30003,
Com,C002,C002
Description
•
If p2=Read, set the communication channel in p7, p8,
and p9.
•
Set the same type of channel in p8 and p9.
• Math channels are an option (/MT).
• For details on data types, registers, and channel
types, see section 4.5.1, "Modbus Client and Master
Function" in the Model GX10/GX20/GP10/GP20
Paperless Recorder User's Manual (IM 04L51B01-
01EN) or section 4.5.1, "Modbus Client/Master
Function," in the Data Acquisition System GM User's
Manual (IM 04L55B01-01EN).
SServer
Server Function
Enables or disables the server function.
Syntax
SServer,p1,p2,p3
p1 Server type (FTP, HTTP, SNTP, MODBUS,
GENE, EtherNetIP, DARWIN, OPC-UA)
GENE
p2 Operation (Off, On)
p3 Port number (1 to 65535)
Query
SServer[,p1]?
Example Use the FTP server function.
SServer,FTP,On,21
Description
•
You cannot specify a port number that is used by
another function.
•
p3 cannot be set to 44818, 2222, 34150, or 34151.
•
p3 is invalid when p1 = DARWIN (Darwin compatible
communication) or when p1 = EtherNetIP.
•
The default port numbers are listed below.
Server type (p1)
FTP
HTTP
SNTP
MODBUS
GENE
•
p1 = EtherNetIP is an option (/E1).
•
p1=OPC-UA is valid on models with the OPC-UA
server (/E3) option.
•
The settings specified with this command takes effect
OIPApply
with the command.
2-58
General communication
Default port number
21
80
123
502
34434
SServerEncrypt
Server Communication Encryption
Sets server communication encryption.
Syntax
SServerEncrypt,p1,p2
p1 Server type (FTP, HTTP)
p2 Encryption (Off, On)
Query
SServerEncrypt[p1]?
Example Encrypt FTP server communication.
SServerEncrypt,FTP,On
SKeepAlive
Keepalive
Sets the keepalive function.
Syntax
SKeepAlive,p1
p1 Operation (Off, On)
Query
SKeepAlive?
Example Use keepalive.
SKeepAlive,On
STimeOut
Communication Timeout
Sets the communication timeout function.
Syntax
STimeOut,p1,p2
p1 Timeout function (Off, On)
p2 Timeout value [minutes] (1 to 120)
Query
STimeOut?
Example Enable the communication timeout, and set the
timeout value to 3 minutes.
STimeOut,On,3
SFtpFormat
FTP Server Directory Output Format
Sets the FTP server directory output format.
Syntax
SFtpFormat,p1
p1 FTP server directory output format (MS-
DOS, UNIX)
Query
SFtpFormat?
Example Specify MS-DOS.
SFtpFormat,MS-DOS
SModDelay
Modbus Server Delay Response
Sets the Modbus server delay response.
Syntax
SModDelay,p1
p1 Delay response (Off, 10ms, 20ms, 50ms)
Query
SModDelay?
Example Specify no delay response.
SModDelay,Off
IM 04L51B01-17EN