Appendix 7 Bluetooth Communication Connection Flow Chart - YOKOGAWA GX10 User Manual

Appendix 7 Bluetooth Communication Connection
App-14
Flow Chart
To compose the complete Bluetooth communication connection flow chart, in appendix 2,
insert the following flow chart after "Connect" in the flow chart shown under "When Using
the Login Function" when the communication login function is in use or "When Not Using the
Login Function" when the function is not in use.
Addition start
No
Password required?
E1: 403
Receive command
Send password with CBTConnect command
CBTConnect command?
Verification match?
Addition end
Start
End
Judge
Response from the recorder (message omitted)
E1: 401
Code
1 A Bluetooth password is required when the first terminal tries to establish a connection when the
password usage is enabled.
2 If no input is received within 2 minutes of a password input request (E403), Bluetooth
communication will be disconnected.
3 If an error occurs during the CBTConnect command check (the number of parameters, whether
the command is a query, etc.), the flow chart sequence follows the same path as when the
password verification fails.
4 The above sequence between "Addition start" and "Addition end" is not recorded in the general
log.
1
Yes
(Password input request)
2
3
E1:266
Disconnect
4
IM 04L51B01-17EN