2.7 Communication Control Commands
CBTConnect
Starts Bluetooth Communication (/C8)
[GM]
Starts Bluetooth communication.
Syntax
CBTConnect,p1
p1 Bluetooth password of the device you
want to connect to
Example Connect to the device whose Bluetooth
password is "PaSswoRD2."
CBTConnect,'PaSswoRD2'
Description
•
This command is valid only when a Bluetooth
password request has been received via Bluetooth
communication. If the command is invalid, error 352,
"Unknown command," will occur.
ESC O
Opens an Instrument : RS-422/485
Command
Starts communication with the recorder. ESC in ASCII
code is 0x1B. For details, see
Syntax
ESC O_p1
Space
_
p1 Instrument address (01 to 99)
Example Open the instrument at address 99.
ESC O 99
Description
•
Specify the address of the instrument that you want to
communicate with.
•
You can only open one instrument at any given time.
•
Use a capital "O."
•
For this command, use CR+LF for the terminator.
•
For the responses to this command, see
ESC C
Closes an Instrument : RS-422/485
Command
Ends communication with the recorder. ESC in ASCII
code is 0x1B. For details, see
Syntax
ESC C_p1
_
Space
p1 Instrument address (01 to 99)
Example Close the instrument at address 77.
ESC C 77
Description
•
This command closes the connection to the
instrument you are communicating with.
•
Use a capital "C."
•
For this command, use CR+LF for the terminator.
•
For the responses to this command, see
2-114
Appendix
1.
page
2-120.
Appendix
1.
page
2-120.
IM 04L51B01-17EN