YOKOGAWA GX10 User Manual page 61

Conditions p7
p6 Action Value
Type
Rising, Recording Memory
Falling,
Edge
Math (math Math
channel)
Display rate RateChange
switch
[GX/GP]
Flag Flag
Manual ManualSample
sample
1
DO output DO
Output to SW
an internal
2
switch
Alarm ACK AlarmACK
Snapshot Snapshot
[GX/GP]
Time TimeAdjust
adjustment
Display data SaveDisplay
save
Event data SaveEvent
save
Event Trigger
3
trigger
Message Message
Display GroupChange
group
change
[GX/GP]
Relative TimerReset
timer reset
Settings ConfigLoad
load
Settings ConfigSave
save [GM]
Favorite PlayList
screen
display [GX/
GP]
Pattern file ProgPatLoad
5
load
Both Recording MemoryStartStop -
start/stop
Math start/ MathStartStop
stop
Display rate RateChange1_2
switch 1/2
[GX/GP]
Flag On/Off FlagOn_Off
1
DO On/Off DOOn_Off
Internal SWOn_Off
switch on/
2
off
1 Can be output only to DO whose type is set to Manual.
2 Can be output only to SW whose type is set to Manual.
3 Valid when the advanced security function (/AS) is disabled.
4 For the setting range, see section 2.3.2, "Parameter Notation and
Range."
5 This is valid only for the program control function (/PG).
Query
SEventAct[,p1]?
Invalid parameters are returned as blanks in
queries.
Example Execute memory start on the rising edge of the
remote control input (channel 0101). Use event
action number 2.
SEventAct,2,On,DI,0101,,Rising,Mem
ory,,Start
Description
IM 04L51B01-17EN
p8 p9 p10 p11
Source Action Action Action
Element Detail Detail 2 Detail 3
Number 1
- Start, - ALL, batch
Stop group
*4
number
- Start, - -
Stop,
Reset
1, 2 Reset - ALL, batch
group
*4
number
1 to 20 - - -
- - - -
Channel Off, On - -
number
Channel Off, On - -
number
- - - -
- - - -
- - - -
- - - ALL, batch
group
*4
number
1 - - ALL, batch
group
*4
number
1, 2 - - -
1 to 100 All, Display Batch
Select group group
*4 *4
number number
Display - - Batch
group group
*4 *4
number number
1 to 12 - - -
1 to 10 - - -
1 to 10 - - -
1 to 20 - - -
1 to 10 - - -
- - ALL, batch
group
*4
number
- - - -
- - -
1 to 20 - - -
Channel - - -
number
Channel - - -
number
• There are limitations to event and action
combinations. For details, see section 1.14 in the
Model GX10/GX20/GP10/GP20 Paperless Recorder
User's Manual (IM 04L51B01-01EN) or section 2.15,
"Configuring the Event Action Function," in the Data
Acquisition System GM User's Manual (IM 04L55B01-
01EN).
• Write only delimiters (commas) for irrelevant
parameters (invalid even if a value is specified).
• Event type "DI" is the channel of the DI module that
has been set to remote module
• You can specify p3 = Status and p6 = Both when
an item that can be specified as an action (flag, DO
channel, or internal switch) is valid.
• Math channel and flag are an option (/MT).
• Communication channels are an option (/MC).
2.4 Setting Commands
(SModeDI command).
2-43
1
2
App