YOKOGAWA GX10 User Manual page 47

Query
SAlmHysIO[,p1[,p2]]?
Example Set a 0.5% hysteresis on alarm 3 of channel
0002.
SAlmHysIO,0002,3,5
Description
•
Hysteresis specified for delay high and low limit
alarms (TH and TL) and high and low limits on rate-of-
change alarms (RH and RL) do not apply.
•
When the input type of a DI channel is Pulse,
hysteresis is fixed at 0.
•
You cannot set DI channels when the measurement
mode is set to high speed.
SAlmDlyIO
Alarm Delay Time
Sets the delay alarm time for an AI, DI, or PI channel.
Syntax
SAlmDlyIO,p1,p2,p3,p4
p1 Channel number
p2 Hour (0 to 24)
p3 Minute (0 to 59)
P4 Second (0 to 59)
Query
SAlmDlyIO[,p1]?
Example Set the channel 0001 alarm delay time to 2
minutes 30 seconds.
SAlmDlyIO,0001,0,2,30
Description
• Set the delay time so that it is an integer multiple of
the scan interval (SScan
•
You cannot set DI channels when the measurement
mode is set to high speed.
STagIO
Tag
Sets a tag to an AI, DI, PI, AO, DO, or PID channel.
Syntax
STagIO,p1,p2,p3
p1 Channel number
p2 Tag (up to 32 characters, UTF-8)
p3 Tag number (up to 16 characters, ASCII)
Query
STagIO[,p1]?
Example Set the channel 0001 tag to "SYSTEM1" and
the tag number to "TI002."
STagIO,0001,'SYSTEM1','TI002'
Description
•
You cannot set DI channels when the measurement
mode is set to high speed.
IM 04L51B01-17EN
command).
SColorIO
Channel Color
Sets the color of an AI, DI, PI, AO, DO, or PID channel.
Syntax
SColorIO,p1,p2,p3,p4
p1 Channel number
p2 R value of RGB display colors (0 to 255,
see "Description.")
p3 G value of RGB display colors (0 to 255,
see "Description.")
P4 B value of RGB display colors (0 to 255,
see "Description.")
Query
SColorIO[,p1]?
Example Set the channel 0001 display color to red.
SColorIO,0001,255,0,0
Description
• The RGB values for different colors are indicated in
the following table.
Color R
Red 255
Green 0
Blue 0
Blue violet 119
102
Brown 153
Orange 255
Yellow green 153
170
Light blue 119
153
Violet 204
221
Gray 153
Lime 102
Cyan 0
Dark blue 0
Yellow 255
Light gray 204
Purple 153
136
Black 0
Pink 255
Rosy brown 204
Pale green 153
187
Dark gray 102
Olive 153
Dark cyan 0
Spring green 0
0
•
You cannot set DI channels when the measurement
mode is set to high speed.
2.4 Setting Commands
G B Note
0 0
153 51
51 255
51 204 GX10/GP10
51 204 GX20/GP20
GM10
51 0
153 51
204 51 GX10/GP10
221 51 GX20/GP20
GM10
170 221 GX10/GP10
204 255 GX20/GP20
GM10
102 204 GX10/GP10
153 221 GX20/GP20
GM10
153 153
255 0
255 255
0 153
255 0
204 204
0 153 GX10/GP10
0 136 GX20/GP20
GM10
0 0
17 153
153 153
255 153 GX10/GP10
255 153 GX20/GP20
GM10
102 102
153 0
153 153
204 153 GX10/GP10
221 119 GX20/GP20
GM10
2-29
1
2
App