YOKOGAWA GX10 User Manual page 202
Gx series; gp series; gm series; smartdac+ communication command
Hide thumbs
Also See for GX10:
- User manual (590 pages) ,
- User manual (34 pages) ,
- User manual (72 pages)
Table of Contents
Advertisement
2.11 Format of the Data Block of Binary Output
2-184
PVSEL (8 bits)
Indicates the status of PV input.
Bit
Value
Description
0
ON
AI1 is used for PV1.
1
ON
EXPV1 is used for PV1.
2
ON
AI2 is used for PV2.
3
ON
EXPV2 is used for PV2.
4
ON
AI2 is used for PV1 (when PV switching is selected.)
5
ON
EXPV2 is used for PV1 (when PV switching is selected.)
PV (32 bits)
Indicates the PV value using an integer.
When the data status is Over or Burnout, the integer will be the value of -5% to 105% of the
range.
SP (32 bits)
Indicates the SP value using an integer.
When the data status is Over or Burnout, the integer will be the value of -5% to 105% of the
range.
OUT (32 bits)
Indicates the OUT value using an integer.
However, when the
Tight shut function is used,
the SD is -S1 and Invalid data is -100.
IM 04L51B01-17EN
Advertisement
Table of Contents
