YOKOGAWA GX10 User Manual page 68

2.4 Setting Commands
STemp
Temperature Unit
Sets the temperature unit.
Syntax
STemp,p1
p1 Temperature unit
C Celsius
F Fahrenheit
Query
STemp?
Example Set the temperature unit to Celsius.
STemp,C
Description
•
You cannot use this command to configure settings
while recording is in progress.
•
You cannot use this command to configure settings
while computation is in progress.
SDPoint
Decimal Point Type
Sets the decimal point type.
Syntax
SDPoint,p1
p1 Decimal point type
Point
Comma
Query
SDPoint?
Example Use a comma for the decimal point.
SDPoint,Comma
Description
•
You cannot use this command to configure settings
while recording is in progress.
•
You cannot use this command to configure settings
while computation is in progress.
SFailAct
Fail Relay Operation (/FL) [GX/GP]
Sets the fail relay (DO channel) operation.
Syntax
SFailAct,p1
p1 Operation
Fail
Status
Query
SFailAct?
Example Output fail signals from the fail relay (DO
channel).
SFailAct,Fail
Description
•
You cannot use this command to configure settings
while recording is in progress.
•
You cannot use this command to configure settings
while computation is in progress.
2-50
Use points.
Use commas.
Output fail information.
Output instrument information.
SFailSts
Instrument Status to Output (/FL) [GX/
GP]
Sets the instrument status to output from the fail relay (DO
channel).
Syntax
SFailSts,p1,p2,p3,p4,p5
p1 Memory/media status (Off, On)
p2 Measurement error (Off, On)
p3 Communication error (Off, On)
P4 Recording stop (Off, On)
p5 Alarm (Off, On)
Query
SFailSts?
Example Output all information.
SFailSts,On,On,On,On,On
Description
•
You cannot use this command to configure settings
while recording is in progress.
•
You cannot use this command to configure settings
while computation is in progress.
SPrinter
Printer
Sets the printer.
Syntax
SPrinter,p1,p2,p3,p4,p5,p6,p7
p1 IP address (0. 0. 0. 0 to 255. 255. 255.
255)
p2 Paper size (A4, A3, Letter)
p3 Paper orientation (Horizontal, Vertical)
P4 Resolution [dpi] (300, 600)
p5 Number of copies (1 to 10)
p6 Snapshot (Off, On)
(GX/GP: Off, On)
(GM: Off)
p7 Fit to page during snapshot printing (Off,
On)
(GX/GP: Off, On)
(GM: Off)
Query
SPrinter?
Example Set the IP address to "192.168.111.24," the
paper size to A3, the paper orientation to
horizontal, the resolution to 600, the number of
copies to 2, and snapshot to On. Print by fitting
to page.
Sprinter,192.168.111.24,A3,Horizon
tal,600,2,On,On
IM 04L51B01-17EN