Slmp Log (Flog) - YOKOGAWA GX10 User Manual

2.10 ASCII Output Format

2.10.20 SLMP Log (FLog)

2-144
The output in response to the command "FLog,SLMP" is shown below.
Syntax
EA<crlf>
yyyy/mo/dd_hh:mm:ss_xxxxxx_kkk...k_nnn_d<crlf>
...
EN<crlf>
yyyy/mo/dd_hh:mm:ss Time of command Tx/Rx
xxxxxx
kkk...k
nnn
d
Detail Group
START Communication
status
STOP
DROPOUT
SKIP Command problem Command is not specified.
INVALID
WAITING Communication
CLOSED problem
RESOVING
CONNECTING
UNREACH
TIMEOUT
ERROR Response problem System error occurred.
BROKEN
BAD_HEAD
BAD_LEN
BAD_DATA
ERROR:□□□□
VALID Data condition
STALE
yyyy
mo
dd
hh
mm
ss
Occurred event
ACTIVE
READY_
CLOSE_
HALT_ _
_ _ _ _
Detail
Command number (0 to 999)
Command type
R
W
O
N
Meaning
SLMP was started.
SLMP was stopped.
Command could not be processed within the specified
interval.
Command cannot be executed.
Server communication recovery wait
Server connection closed
Server connection is being established (resolving
address).
Server connection is being established (requesting
connection).
Server connection failed (peer not found).
Server connection failed (timeout occurred).
Response message is corrupt.
Response message header error
Response message size error
Response message data error
Error response received (4-digit error number displayed
in the squares)
Data is being acquired normally.
Data is old.
Year (1900 to 2099)
Month (01 to 12)
Day (01 to 31)
Hour (00 to 23)
Minute (00 to 59)
Second (00 to 59)
Communication has been successfully
established and normal data has been
acquired.
Communication has been successfully
established but normal data has not
been acquired.
TCP connection in progress.
Communication has failed and has
entered a communication recovery wait
state
Other than those above
Read
Write
Immediate write
Others
IM 04L51B01-17EN