YOKOGAWA GX10 User Manual page 86

2.4 Setting Commands
SHomeKind
Standard Screen [GX/GP]
Set the standard screen.
For Multi Panel
Syntax
SHomeKind,p1,p2,p3
p1 Screen type (Multi)
p2 Multi panel number (1 to 20)
p3 Batch group number (1 to the number
used)
p3 is valid when the multi batch function (/
BT) is enabled.
For Screens other than Multi Panel
Syntax
SHomeKind,p1,p2,p3
p1 Screen type
Trend
Digital
Bar
Overview
Alarm
Message
Memory
Report
Modbus-M
Mosbus-C
Watt
Switch
Action-Log
Error-Log
Commu-Log
Ftp-Log
Web-Log
Mail-Log
Modbus-Log
Sntp-Log
Dhcp-Log
SLMP-Log
Network
SLMP-C
Reminder
Setting
ControlGroup
ControlSummary
ControlAlarm
Summary
ControlOverview
SaveLoad
SystemInfo
Custom
Display
Batch
Overview
Tuning
2-68
Trend
Digital
Bar graph
OVERVIEW
Alarm summary
Message summary
Memory summary
Report summary
Modbus master status
Modbus client status
WT communication
status
Internal switch/relay
status
Event log
Error log
Communication log
FTP log
Web log
Mail log
Modbus log
SNTP log
DHCP log
SLMP log (/E4)
Network information
SLMP client status (/E4)
Reminder (/AH)
Settings
Control group
Control summary
Control alarm summary
Control overview
Save load
System information
Customized display
screen
Batch overview (/BT)
Tuning
ProgramSelect Program selection (/PG)
ProgramRun
p2 Display group number
(when p1 is not CustomDisplay)
Customized display screen number (1 to
30)
(when p1 is CustomDisplay)
Control group number (1 to 10)
(If p1=ControlGroup)
Program pattern number (1 to 99)
(If p1=ProgramSelect)
p3 Batch group number (All, 1 to the number
used)
p3 is valid when the multi batch function (/
BT) is enabled.
Query
SHomeKind?
Example Set the standard screen to trend of display
group 1.
SHomeKind,Trend,1
Description
• Report is an option (/MT).
• Modbus-M and Modbus-C are an option (/MC).
• Watt is an option (/E2).
• CustomDisplay is an option (/CG).
• Multi is a GX20/GP20 display.
• p3 is valid when the multi batch function (/BT) is
enabled.
• When the multi batch function (/BT) is not available,
p3 is fixed to 1.
• p1 cannot be set to BatchOverview when p3 is 1 to
12.
P1 cannot be set to Trend, Digital, Bar, Alarm,
Message, Memory, or Multi when p3 = All.
• p3 cannot be set to All when p1 is set to Trend, Digital,
Bar, Alarm, Message, Memory, or Multi.
p3 cannot be set to 1 to 12 when p1 is set to
BatchOverview.
•
ControlGroup, ControlSummary,
ControlAlarmSummary, ControlOverview, and Tuning
are valid when the PID control module is installed.
•
ProgramSelect and ProgramRun are options (/PG).
SFavoriteMonitor
Favorite Screen Display Information
[GX/GP]
Sets the favorite screen display information.
Syntax
SFavoriteMonitor,p1,p2,p3
p1 Favorites number (1 to 20)
p2 Information type (see the table of the
SMonitor
p3 Status (see the table of the
command)
Query
SFavoriteMonitor[,p1[,p2]]?
Example Set the trend display to all-channel display.
SFavoriteMonitor,1,Trend,All
Program operation (/
PG)
command)
SMonitor
IM 04L51B01-17EN