2.10 ASCII Output Format
2.10.3
Internal Switch Status (FRelay)
2.10.4
Latest re-transmission output (AO channel) state (FTransStatAO)
2-124
The output in response to the command "FRelay,1" is shown below.
Syntax
EA<crlf>
S001-010:aaaaaaaaaa<crlf>
S011-020:aaaaaaaaaa<crlf>
S021-030:aaaaaaaaaa<crlf>
S031-040:aaaaaaaaaa<crlf>
S041-050:aaaaaaaaaa<crlf>
S051-060:aaaaaaaaaa<crlf>
S061-070:aaaaaaaaaa<crlf>
S071-080:aaaaaaaaaa<crlf>
S081-090:aaaaaaaaaa<crlf>
S091-100:aaaaaaaaaa<crlf>
EN<crlf>
aaa...a
The most recent internal switch status is output.
The internal switch status is output 10 channels per line over 10 lines.
"1" indicates that the internal switch is ON, and "0" indicates that the internal
switch is OFF.
The output in response to the command "FTransStatAO" is shown below.
Syntax
When no expandable I/O is connected
EA<crlf>
M00:aaa...<crlf>
M01:aaa...<crlf>
M02:aaa...<crlf>
M03:aaa...<crlf>
M04:aaa...<crlf>
M05:aaa...<crlf>
M06:aaa...<crlf>
M07:aaa...<crlf>
M08:aaa...<crlf>
M09:aaa...<crlf>
EN<crlf>
When an expandable I/O or sub unit is connected
Only the information of detected units will be output.
EA<crlf>
Unit:nnf
M00:aaa...<crlf>
M01:aaa...<crlf>
M02:aaa...<crlf>
M03:aaa...<crlf>
M04:aaa...<crlf>
M05:aaa...<crlf>
M06:aaa...<crlf>
M07:aaa...<crlf>
M08:aaa...<crlf>
M09:aaa...<crlf>
:
Unit:nnf
M00:aaa...<crlf>
M01:aaa...<crlf>
M02:aaa...<crlf>
M03:aaa...<crlf>
M04:aaa...<crlf>
M05:aaa...<crlf>
M06:aaa...<crlf>
IM 04L51B01-17EN