YOKOGAWA GX10 User Manual page 90

2.4 Setting Commands
SWebCustomMenu
Web Monitor Screen
Sets the contents displayed on the monitor screens.
Syntax
SWebCustomMenu,p1,p2,p3,p4,p5
p1 User level (User, Monitor)
p2 Status display category (On, Off)
p3 Log category (On, Off)
p4 System category (On, Off)
p5 File category (On, Off)
Query
SWebCustomMenu?
Example Display the log category and file category
contents on the monitor screen when a user
whoes user level is User accessed.
SWebCustomMenu,User,Off,On,Off,On
Description
•
This command can be executed only when the user is
logged in as an administrator.
•
p1=Monitor is valid when the advanced security
function (/AS) is enabled.
SSchedule
Schedule Management
Configures the schedule management function.
Syntax
SSchedule,p1,p2,p3,p4,p5,p6,p7,p8
,p9
p1 Schedule number
p2 Schedule management function On/Off
On
Off
p3 Date Year (2001 to 2035)
p4 Date Month (1 to 12)
p5 Date Day (1 to 31)
p6 Notification date
1day
2day
3day
4day
5day
6day
7day
8day
9day
10day 10 days before
p7 Renotification interval (10min, 30min, 1h,
8h, 24h)
p8 Notification buzzer (On, Off)
p9 Calibration correction settings
(GX/GP: Off, On)
(GM: Off)
On
Off
2-72
Use
Not Use
1 day before
2 days before
3 days before
4 days before
5 days before
6 days before
7 days before
8 days before
9 days before
The calibration correction settings
is shown in the date setting
screen.
The calibration correction settings
is not shown in the date setting
screen.
Query
SSchedule[,p1]?
Example Set schedule number 1 with the date set to
December 24, 2015, the notification set to 5
days before, and the renotification interval to
1 hour. Enable the notification buzzer. Show
the calibration correction settings in the date
setting screen.
SSchedule,1,On,2015,12,24,5day,1h,
On,On
Description
•
This command can be used on a product with the
aerospace heat treatment (/AH) option.
•
Operation lock ChangeSet and user privileges
CalibSet limitations apply to this command.
SScheduleText
Schedule Management Text
Sets the schedule management title and notification
content.
Syntax
SScheduleText,p1,p2,p3,p4
p1 Schedule number (1 to 12)
p2 Title (32 characters)
p3 Notification content 1 (32 characters)
p4 Notification content 2 (32 characters)
Query
SScheduleText[,p1]?
Example For schedule number 1, set the title to
"Calibration correction" and notification content
1 to "Sensor correction coefficient."
SScheduleText,1,"Calibration
correction", "Sensor coefficient"
Description
•
This command can be used on a product with the
aerospace heat treatment (/AH) option.
•
Operation lock ChangeSet and user privileges
CalibSet limitations apply to this command.
SDualGroup
Scan group number of the display group
If the measurement mode is set to dual interval, set the
scan group of the display group.
Syntax
SDualGroup,p1,p2
p1 Group number
p2 Scan group number (1 or 2)
Query
SDualGroup[,p1]?
Example Set master scan interval to scan group 2.
SDualGroup,5,2
Description
•
You can set this command when the dual interval
function is enabled.
IM 04L51B01-17EN