Sample Transport Self Alignment - Agilent Technologies G1367A Reference Manual

Table 15 Maintenance positions
Function
Change Needle
Change Carrier assembly
Change Loop capillary
Home position
Park arm

Sample Transport Self Alignment

The sample transport alignment with the sampling unit and the well-plate tray
is required to compensate for larger deviations in positioning the needle
carrier.This function is in the diagnose screen of the Chemstation or the
Control Module.
The sample transport self alignment is required after disassembling the
system or when you exchange:
• The sample transport.
• The sampling unit.
• The MTP main board.
• The well plate sampler tray
The sample transport self alignment requires the standard well-plate tray (Part
WA RN ING
Number: G1367-60001)
The sample transport self alignment must be done with an empty WPS tray
WA RN ING
1100 Series WS MWS Reference Manual
Arm position in X Arm position in
Theta
Left side Straight
Left side Straight
Middle Left
Right side Left rear
Left side Right rear
Troubleshooting and Test Functions
Arm Position in Z Note
Up No current on Theta
Middle No current on the ST
Up
Up
Up
3
89