Agilent Technologies G1367A Reference Manual page 249

8
Control Module Screens of the Well-plate Samplers
Settings More...
By selecting More...Settings on the pull-down menu you can enter WPS set
points for the Draw Speed, Eject Speed and Draw Position Offset. Changes
must be acknowledged with F6 (Done).
By selecting More...Needle Wash on the pull-down menu you can specify the
time period for inserting the needle into the flush port or define how often the
needle is dipped into a specified wash vial. Changes must be acknowledged
with F6 (Done).
1100 Series WS MWS Reference Manual 249