Using the ESD Strap
Electronic boards are sensitive to electrostatic discharge (ESD). In order to prevent
CAU TI O N
damage, always use an ESD strap supplied in the accessory kit.
1 Unwrap the first two folds of the band and wrap the exposed adhesive side
2 Unroll the rest of the band and peel the liner from the copper foil at the
3 Attach the copper foil to a convenient and exposed electrical ground.
Figure 17
1100 Series WS MWS Reference Manual
firmly around your wrist.
opposite end.
Using the ESD Strap
Repairing the Sampler
4
107