Performance Specifications - Agilent Technologies G1367A Reference Manual

9
Specifications

Performance Specifications

Table 79
Type
GLP features
Communications
Safety features
Injection range
Precision
Sample viscosity range
Sample capacity
Injection cycle time
Carry-over
274
Performance Specifications Agilent 1100 Series Well Plate Sampler
Specification
Early maintenance feedback (EMF), electronic records of
maintenance and errors
Controller-area network (CAN). RS232C, APG-remote standard,
optional four external contact closures and BCD vial number output
Leak detection and safe leak handling, low voltages in maintenance
areas, error detection and display
0.1 – 100 µl in 0.1 µl increments
Up to 1500 µl with multiple draw (hardware modification required)
Typically < 0.5 % RSD of peak areas from 5 – 100 µl,
Typically < 1 % RSD from 1 – 5 µl
0.2 – 5 cp
2 × well-plates (MTP) + 10 × 2 ml vials
100 x 2 ml in one tray
40 x 2 ml in half tray
Typically < 30 s using following standard conditions:
Default draw speed: 200 µl/min
Default eject speed: 200 µl/min
Injection volume: 5 µl
Typically < 0.01 % using the following conditions:
Column: 125 x 4 mm Hypersil ODS, 5 µm
Mobile phase: Water/Acetonitrile = 80/20
Flow rate: 1 ml/min
Injection volume: 1 µl caffeine (1 mg/ml), 5 µl water to test carryover
Outside wash of needle before injection: 20 sec with water using
flush port
1100 Series WS MWS Reference Manual