Agilent Technologies G1367A Reference Manual page 16

1
Installing the Sampler
Environment
Your autosampler will work within specifications at ambient temperatures
and relative humidity as described in
Do not store, ship or use your autosampler under conditions where temperature
CAU TI O N
fluctuations may cause condensation within the autosampler. Condensation will
damage the system electronics. If your autosampler was shipped in cold weather, leave
it in its box, and allow it to warm up slowly to room temperature to avoid condensation.
Table 1 Physical Specifications - sampler (G1367A / G1377A)
Type
Weight
Dimensions
(height × width × depth)
Line voltage
Line frequency
Power consumption (apparent power)
Power consumption (active power)
Ambient operating temperature
Ambient non-operating temperature
Humidity
Operating Altitude
Non-operating altitude
Safety standards: IEC, CSA, UL
16
Specification
15.5 kg (34.2 lbs)
200 × 345 × 440 mm
(8 × 13.5 × 17 inches)
100 – 240 VAC, ±10 %
50 or 60 Hz, ±5 %
300 VA
200 W
∞ ∞
4 to 55 C (41 to 131 F)
∞ ∞
-40 to 70 C (-4 to 158 F)
∞
< 95 %, at 25 to 40 C (77 to 104
Up to 2000 m (6500 ft)
Up to 4600 m (14950 ft)
Installation Category II, Pollution Degree 2
Table 1.
Comments
Wide-ranging capability
Maximum
Maximum
∞
F) Non-condensing
For storing the
autosampler
1100 Series WS MWS Reference Manual