Agilent Technologies G1367A Reference Manual page 247

8
Control Module Screens of the Well-plate Samplers
Settings
Within Settings you can change the WPS parameters like the Injection Volume.
You can toggle between Standard Injection (with/without needle wash) and
Injector Program. There are different sets of parameters available through the
F1-5 navigation-keys for optimizing the operation of the WPS. F7 (Reset)
resets the WPS to default values. F8 (On/Off) opens a window to turn on/off
the thermostat. Changes must be acknowledged with F6 (Done).
Settings screen with thermostat connected.
1100 Series WS MWS Reference Manual 247