Agilent Technologies G1367A Reference Manual page 153

Installing the power supply
1 Insert the coupler onto the switch of the new power supply.
2 Install the power supply in the module.
3 Connect the light pipe to the coupler.
4 Install the bottom foam. Ensure the cables are positioned properly.
5 Install the exhaust fan, (see
6 Install the MTP board, (see
7 Install the main fan, (see
8 Install the sampling unit, (see
9 Install the sample transport, (see
10 Install the top cover, top plate, and foam (see
11 Replace the plate tray in the tray base.
12 Turn ON the sampler, close the front door.
13 The system will reset automatically.
14 In the user interface perform a "Sample Transport Self Alignment".
1100 Series WS MWS Reference Manual
page 133)
page 132).
"Installing the exhaust fan"
"Installing the MTP main board"
"Installing the main fan"
"Installing the sampling unit"
"Installing the sample transport"
Repairing the Sampler
on page 145).
on page 147).
on page 144).
on page 135).
"Top Cover and Foam"
4
on
on
153