Agilent Technologies G1367A Reference Manual page 250

8
Control Module Screens of the Well-plate Samplers
By selecting More...Auxiliary on the pull-down menu you can specify an
Equilibration Time after drawing and before injecting and you can
enable/disable the Vial / Well Bottom Sensing. Changes must be
acknowledged with F6 (Done).
By selecting More...High Throughput on the pull-down menu you can enter
different optimization modes like the 'Automatic Delay Volume Reduction' and
'Overlapped Injection'. Changes must be acknowledged with F6 (Done).
250 1100 Series WS MWS Reference Manual