4
Basic Operation
Setting Up and Running a Single Sample
Setting Up and Running a Single Sample
1 Click the Sample Run window.
2 Enter the Sample Name, the Data File Name and Path, and other values.
3 Optional. Enter the Additional Information. If needed, change the value of the
If using Both Acquisition and DA Part of Method to run, the Override DA method is
NOTE
required.
4 To start the single sample run, click
Agilent Revident LC/Q-TOF System User Guide
parameters in the Additional Information list.
Run a Data Analysis method from this window by selecting Both Acquisition
and DA or Acquisition Only for the Part of Method to run.
Run in the Sample Run window toolbar.
75