Operation Mode - Mitsubishi Electric MELSEC iQ-F FX5 User Manual

Digital output value
The digital values after the sampling processing or each average processing are stored.
Logging data
When the logging function is used, digital output values or digital operation values are collected.
Maximum value/Minimum value
The maximum and minimum values of the digital operation values are stored.
Digital operation value
These values are obtained by operating a digital output value using the digital clipping function, scaling function, and shift
function. When each function is not used, the same value as the digital output value is stored.

Operation mode

Operation mode of multiple input module can be selected.
Setting procedure
Set 'Operation mode setting'.
[Navigation window]  [Parameter]  [Module Information]  Module model name  [Module Parameter]  [Basic
setting]  [Operation mode setting function]
Operation mode
Normal mode
*1
2CH conversion mode
Offset/gain setting mode
*1 It cannot be used in FX2N allocation mode.
Description
A mode to perform a normal conversion.
Performs A/D conversion of 2CH and can update the digital output value at the same time.
A mode used for performing the offset/gain setting at user range setting.
3
3 FX5-8AD
339
3.4 Functions