Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 467

■Default value
The default value is set to 0.
• Since the default value is 0, change the setting value according to the processing method.
• The setting for this area is ignored in the channel where Sampling processing (0) is set to 'CH1 Averaging
process specification' (Un\G501).
CH1 Scaling enable/disable setting
Set whether to enable or disable the scaling.
Setting value
0
1
Setting a value other than the above causes a scaling enable/disable setting range error (error code: 1A0H).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Scaling enable/disable setting
CH Scaling enable/disable setting (In FX2N allocation mode
function)
■Enabling the setting
Turn offonoff 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■Default value
The default value is Disable (1).
CH1 Scaling upper limit value
Set an upper limit value for the range of the scale conversion.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Scaling upper limit value
CH Scaling upper limit value (In FX2N allocation mode
function)
■Setting range
The possible setting range is from -32000 to +32000.
Setting a value out of the range causes a scaling setting range error (error code: 1A1H).
In the channel where a set value does not satisfy the condition "the scaling upper limit value  the scaling lower limit value", a
scaling upper/lower limit value setting error (error code: 1A2H) occurs.
When 'CH1 Scaling enable/disable setting' (Un\G504) is set to Disable (1), the setting for 'CH1 Scaling upper limit value'
(Un\G506) is ignored.
■Enabling the setting
Turn offonoff 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■Default value
The default value is set to 0.
Setting content
Enable
Disable
CH1 CH2 CH3 CH4
504 704 904 1104
1091 1092 1093 1094
CH1 CH2 CH3 CH4
506 706 906 1106
1101 1103 1105 1107
CH5 CH6 CH7
1304 1504 1704
1095 1096 1097
CH5 CH6 CH7
1306 1506 1706
1109 1111 1113
APPX
Appendix 12 Buffer Memory Areas
CH8
1904
1098
A
CH8
1906
1115
465