4.
Mark the checkbox of the channel where offset and gain
values are to be set.
5.
Select the voltage or current and click the [Offset
Setting] button.
6.
Apply the offset voltage or current to the terminal of the
corresponding channel, and click [Yes] button.
7.
Check that "Offset Status" has changed to "Changed",
and click [Gain Setting] button.
8.
Apply the gain voltage or current to the terminal of the
corresponding channel, and click [Yes] button.
9.
Check that "Gain Status" has changed to "Changed",
and click [Close] button.
1 FX5-4AD
93
1.8 Offset/Gain Setting
1