Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 480

CH1 Level trigger condition setting
Set the condition for the occurrence of a hold trigger when using the level trigger in the logging function.
To use the level trigger, perform level trigger condition setting to one of Level trigger (Condition: Rise)(1), Level trigger
(Condition: Fall)(2), or Level trigger (Condition: Rise and fall)(3).
For details on the logging function, refer to the following.
Page 371 Logging function
Setting value
0
1
2
3
Setting a value other than the above causes a level trigger condition setting range error (error code: 1D5H).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Level trigger condition setting
CH Level trigger condition setting (In FX2N allocation mode
function)
■Enabling the setting
Turn offonoff 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■Default value
The default value is Disable (0).
CH1 Trigger data
Set a buffer memory address to be monitored using a level trigger.
Set the buffer memory address where the target data for monitoring is stored.
For details on the logging function, refer to the following.
Page 371 Logging function
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Trigger data
CH Trigger data (In FX2N allocation mode function)
■Setting range
The possible setting range is from 0 to 9999.
Setting a value other than the above causes a trigger data setting range error (error code: 1D6H). Logging cannot be
performed.
■Enabling the setting
Turn offonoff 'Operating condition setting request' (Un\G70, b9) to enable the setting.
APPX
478
Appendix 12 Buffer Memory Areas
Setting content
Disable
Level trigger (Condition: Rise)
Level trigger (Condition: Fall)
Level trigger (Condition: Rise and Fall)
CH1 CH2 CH3
540 740 940
9211 9212 9213
CH1 CH2 CH3
541 741 941
9221 9222 9223
CH4 CH5 CH6
1140 1340 1540
9214 9215 9216
CH4 CH5 CH6
1141 1341 1541
9224 9225 9226
CH7 CH8
1740 1940
9217 9218
CH7 CH8
1741 1941
9227 9228