1
FX5-4AD
1.1
Overview
The FX5-4AD analog input module can convert 4 points of analog input values (voltage, current) into digital values.
It can be added to the FX5 CPU module and enables it to capture voltage/current data of 4 channels.
(1)
(1) FX5 CPU module
(2) Analog input module (FX5-4AD)
(3) Analog device connection cable
(4) Analog device (flow sensor etc.)
1.2
Specifications
This section describes the specifications of FX5-4AD.
General specifications
The general specifications other than below are the same as those for the CPU module to be connected.
For general specifications, refer to the following manuals.
MELSEC iQ-F FX5U User's Manual (Hardware)
MELSEC iQ-F FX5UC User's Manual (Hardware)
Items
Dielectric withstand voltage
Insulation resistance
Power supply specifications
The following table lists the power supply specifications.
Items
Internal power supply
1 FX5-4AD
18
1.1 Overview
(2)
(3)
(4)
Specifications
500 V AC for 1 minute
10 M or higher by 500 V DC
insulation resistance tester
Specifications
Power supply voltage
24 V DC, 5 V DC
Current consumption
24 V DC: 40 mA
5 V DC: 100 mA
Between all terminals and ground terminal